 | Up a level |
Aadhirai, G (2020) Estimation of Jaw Opening Forces in Female subjects with Anteroposterior Mandibular Dysplasia. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Abdul Shameer, CK (2017) Clinical efficiency of new generation elastomeric ligatures versus conventional elastomeric ligatures in the canine retraction phase of pre adjusted edgewise appliance therapy: An In-vivo study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Abinaya, R (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Abirami Devi, M (2022) Comparative Evaluation of Four Different Mouthwashes on Frictional Resistance between the Orthodontic Bracket and Archwire: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Aboobacker Ali, A (2019) Comparison of Three Aligning Archwires in terms of Alignment Efficiency, Stress Distribution and Pain Perception: A Prospective Clinical Trial. Masters thesis, Madha Dental College and Hospital, Chennai.
Aishwarrya, P (2022) Evaluation of Facial Attractiveness in Non Orthodontically Treated Population using Three Dimensional Dynamic Smile Recordings: An In Vivo study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Ajma Aisha, Ali (2018) Effect of mobile phone use with and without earphones on salivary nickel ion release from fixed orthodontic appliances: A Cross Over Trial. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Akhil, Gopi (2015) Microleakage of Resin Modified Glass Ionomer cements at the Cement-Enamel Cement-Band Interfaces. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Akila Devi, K (2022) Evaluation of Smile Characteristics in Various Growth Pattern. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Akilananth, B (2012) Comparison of shear & tensile bond strength of brackets bonded with a conventional (2 step) and a self- etch (All in One) bonding systems: An in vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Amritha, A (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Amruthasree, M (2019) Three Dimensional Evaluation of Accuracy of Bracket Positioning. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ananthakrishnan, M G (2018) To compare and evaluate the validity and reliability of tooth widths and bolton ratios obtained from intraoral scanner and plaster models. Masters thesis, J.K.K. Nataraja Dental College and Hospital, Komarapalayam.
Anbuselvan, P (2020) Salivary Alkaline Phosphatase as a Biomarker of Skeletal Maturation. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Andiappan, A (2019) Assessment of Frontal and Maxillary Sinus Area in Various Skeletal Malocclusions and their correlation with other Craniofacial Patterns: A Lateral Cephalometric study. Masters thesis, Best Dental Science College, Madurai.
Aneesh, Alim (2013) Evaluation of accuracy and reliability of three different computerized cephalometric programs nemoceph, onyx and facad with conventional hand tracing method. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekaram.
Aneeta, Johny (2018) An in vitro study to compare the effects of different colour changing orthodontic adhesives and different resin removal techniques on enamel colour. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Angeline Archana, J P (2013) Evaluation of maxillary incisor true intrusion – A comparison between mini-implants and Conventional mechanics. Masters thesis, Sri Ramakrishna Dental College Hospital, Coimbatore.
Anirudha Kabilan, (2022) UNSPECIFIED Masters thesis, Best Dental Science College, Madurai.
Anisha, N Prasad (2015) Evaluation of deflection characteristics of mini implants following placement: An Ex-vivo study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Anitha, G (2013) Comparison of Enamel Surfaces using Scanning Electron Microscope Following Debonding of Ceramic Brackets with Hard Tissue Laser (Erbium Doped Yttrium Aluminium Garnet) and Other Techniques: An Invitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Ann Nimmy Rajeev, (2019) Evaluate and Correlate the Esthetic Perception of Orthodontists and Laypersons on variations of Smile Arc and Buccal Corridor Sizes in different facial forms. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Anshuman, Mundhra (2005) Assessment and comparision of Tongue and Sagittal Airway Dimension in class I, II and III Malocclusion - A Cephalometric study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Anu Bharathy, M (2020) Comparative Evaluation of Shear Bond Strength of Four Different Light Cure Orthodontic Adhesives used in Fixed Appliance Therapy: An In vivo study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Anu Joseph, (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Anushya, S (2016) A Prospective Clinical study to Evaluate the Rate of En-Masse Retraction with Microosteoperforations. Masters thesis, Ragas Dental College and Hospital, Chennai.
Anvesha Ganguly, (2016) A Prospective Randomized Controlled study to Assess the Efficiency of Active Self Ligating Bracket System Vs Conventional Bracket System. Masters thesis, Ragas Dental College and Hospital, Chennai.
Apros Kanna, A S (2012) Evaluation of severity and treatment need using Occlusal & IOTN indices in Coimbatore population. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Aravind, K (2022) Assessment of the Shear Bond Strength and Adhesive Remnant Index (ARI) of a New Self Priming Adhesive and Comparing with that of Earlier Available Self Priming Adhesive and A Conventional Adhesive: An In Vitro study. Masters thesis, Sri Venkateswara Dental College and Hospital, Chennai.
Arpitha Rao, (2016) Assessment of Three Dimensional Changes in Condylar Position in Patients with Temporomandibular Disorders. Masters thesis, Ragas Dental College and Hospital, Chennai.
Arun, V R (2013) Comparison of Frictional Resistance to Sliding on Pre-Adjusted Edgewise Brackets using Three Different Methods of Ligation and the Effect of Fluoride Mouth Rinse on Friction - An Invitro Study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Arun Narayanan, (2019) Comparative study of efficiency of various oral hygiene measures on halitosis and its causative organisms in fixed appliance therapy patients. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Arunchander, G J (2015) Evaluation of variables affecting distribution of stresses in orthodontic miniscrews and in surrounding cortical/cancellous bone: A Three Dimensional Finite Element Analysis. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Ashok Kumar, A (2022) Comparative Evaluation of Mechanical Properties of Cobalt-Chromium, Stainless Steel and β-Titanium Wires: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Ashwin, Sudhesh (2013) Evaluation of orthodontic tooth movement in humans with low level laser therapy. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ashwin, Varghese Thomas (2012) Evaluation of changes in smile aesthetics with fixed orthodontic treatment. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ashwinkumar, S (2022) A Comparative Evaluation of BPA Released from Five Different Orthodontic Aligners: An Invitro study using Gas Chromatography Coupled with Mass Spectrometry. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Asish, D (2006) Masseter Thickness by Ultrasonography, Facial Morphology, Facial form and Maxillary Arch Width in Females. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Aswini Soundharya, S (2022) Comparative Evaluation of Stress Distribution Patterns and Location of Centre of Resistance During Temporary Anchorage Device Assisted Molar Intrusion With and Without Micro Osteoperforation: A Three-Dimensional Finite Element Analysis. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Ayush, Sharma (2012) Evaluation of torque expression of four commercially available self-ligating brackets: A finite element study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Bajath, B (2019) Impact of Micro Osteoperforations on the Rate of Tooth Movement and Root Resorption. Masters thesis, Ragas Dental College and Hospital, Chennai.
Balaji, J (2018) Effect of fluoride release by bonding agent and varnish in prevention of enamel decalcification during orthodontic treatment: A comparative study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Balavignesh, T (2018) Effect of mobile phone with and without earphones usage on metal ion release from fixed orthodontic appliances. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Ben Joshua, (2019) Beta Angle as a Viable Alternative to Steiner’s Analysis’ ANB to Identify Sagittal Discrepancie. Masters thesis, CSI College of Dental Sciences and Research, Madurai.
Bhadrinath, S (2008) Reliability of Serum Dehydroepiandrosterone Sulphate (DHEAs) as an Indicator of Skeletal Maturation: A Comparative study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Bheemisetty Swetha, (2022) Evaluation of Nasolabial Angle and Mentolabial Sulcus using Silhouettes in the Perception of Facial Aesthetics: An Invitro study. Masters thesis, Tagore Dental College and Hospital, Chennai.
Bhuvaneshwaran, T (2018) Comparison of shear bond strength of two orthodontic bonding systems used for bonding ceramic brackets (Polycrystalline) to zirconia surfaces: An Invitro study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Bhuvaneshwari, V (2020) A Comparative Evaluation of BPA Released from Different Orthodontic Adhesives: An Invitro Study using Gas Chromatography Coupled with Mass Spectrometry. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Bibin Ninan, Mathew (2016) Comparison of Frictional Resistance between Monocrystalline and Polycrystalline Brackets in Conventional and Self Ligating Ceramic Brackets using Different Archwire Alloys. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Bravin Paul, P (2022) UNSPECIFIED Masters thesis, C.S.I. College of Dental Sciences and Research, Madurai.
Chandana, L R (2019) A Comparative Evaluation of the Release of Metal Ions from Round and Rectangular Superelastic Niti Wires of Three Different Manufacturers: An In Vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Chandra Lekha, C (2022) Comparative Evaluation of Static Frictional Resistance and Surface Roughness of Thee Different Aligning Archwires against 0.022 Slot of Stainless Steel Brackets: An In Vitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Charles Finny, M (2018) An in-vivo assessment of bracket failure and adhesive remnant index between two Different light cure adhesives with light Emitting diode: A Split Mouth study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Deepak, C (2013) Evaluation of peak insertion torque and dimensional changes of miniscrew implant of varying diameters in different cortical bone thickness: An in-vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Deepak, P (2020) To Evaluate the Effects of Antimicrobial Primer containing Selenium on Development of White Spot Lesion: An Invitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Deepthi Chandran, B (2022) Evaluation of Human Fetal Osteoblast Proliferation and Morphology on Titanium Infrazygomatic Mini-Implants: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Dhayanithi, D (2013) Comparative Study of Tooth Size and Arch Dimensions in Class I Crowded, Proclined Malocclusion and Class I Normal Occlusion. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Dinesh Kumar, A (2010) Analysing Mechanical Property of Two Different Closing Loops using Finite Element Analysis and Universal Testing Machine: A Comparitive Study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Dinesh Nandakumar, G (2018) Comparison of dental mineralization stages using orthopantamogram (OPG) and skeletal maturation using hand wrist radiographs during pubertal growth period. Masters thesis, J.K.K. Nataraja Dental College and Hospital, Komarapalayam.
Divya, D (2020) Evaluation of Mechanical and Resistance Strength of Infrazygomatic Mini-Implants: An In vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Diwakar, B (2016) A Prospective Randomized Clinical Trial to Assess the Efficiency of Passive Self-Ligating Bracket Vs Conventional Bracket System. Masters thesis, Ragas Dental College and Hospital, Chennai.
Durga, R (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Durga, R (2020) Correlation of Chemical Properties of A-Niti Wires with Mechanical Properties: An Invitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Elamathi, K (2020) Evaluation of Cranial Bone Thickness in patients with Antero-Posterior Maxillary Dysplasia. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Fayyaz Ahamed, S (2011) Comparison of Bond Failure and Accuracy of Two Indirect Bonding Techniques and Materials: An In-Vivo Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Gayathri, M (2017) Evaluation of Upper Lip Pressure Variations in relation To Retraction of Maxillary Anterior Teeth: An In Vivo study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Gnananandhan, C A (2020) Leaching of Three Different Commercial Orthodontic Adhesives used for Permanent Lingual Retention: An In-Vitro Comparative study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Gopinath, K (2018) Evaluation of center of resistance of maxillary anterior segment when retracting with lingual appliance, sliding mechanics and palatal mini-screw implants: A Finite Element study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Goutham, Kalladka (2011) Root Damage and Repair following Placement of a Temporary Anchorage Device: A Histological Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Grace Ruth, N (2019) Changes in the Mid-Palatal and Circum-Maxillary Sutures induced by Maxillary Skeletal Expander. Masters thesis, Ragas Dental College and Hospital, Chennai.
Hariharasudan, J (2020) Dietary Habits Influence on Trace Element Release from Fixed Orthodontic Appliances in South Indian Population: In-vitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Harish, P (2018) Alignment efficiency, gingival crevicular fluid volume and alterations in periodontal parameters between two bracket systems; An Invivo study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Haritha, P S (2008) Clinical Evaluation of Bite Force in Children and Adults with Normal Occlusion and Comparison of Normal Adult Bite Force in Individuals with Different Malocclusions. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Honeysha, E (2022) UNSPECIFIED Masters thesis, C.S.I. College of Dental Sciences and Research, Madurai.
Ilanchezhian, J (2022) Assessment of Stress Distribution on the Tooth Surface during Debonding of Various Orthodontic Brackets: Finite Element study. Masters thesis, Madha Dental College, Chennai.
Indirasena, C (2022) The Association between Head Posture and Dental Malocclusion among Subjects Seeking Orthodontic Treatment in Thiruchengode, Namakkal District. Masters thesis, Vivekananda Dental College For Women, Tiruchengode.
Indra, AN (2018) Deflection changes of mini implants at different bone densities: An In vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Indumadhi, G (2013) Assessment of Enamel Loss after Debonding of Ceramic, Composite and Metal Bracketsan: An In Vitro Study. Masters thesis, Tamil Nadu Govt Dental College and Hospital, Chennai.
Indumathi, S (2020) Evaluation of Physical Properties of Silver Coated and Uncoated NiTi Arch Wires: An Invitro study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Jafer Sadik, N (2020) Influence of Tonsillar grades on the Dental arch Measurements. Masters thesis, Best Dental Science College, Madurai.
Janu S Nair, (2019) Comparison of Stress Distribution during Maxillary Protraction using Different Miniplate Diameters and Force Levels: A Three Dimensional Finite Element Analysis. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Jebilla, Pringle (2016) Evaluation and Comparison of Root Proximity of Maxillary and Mandiblular Inter Radicular Sites for Mini Implant Placement using Orthopantomogram (OPG) and Cone Beam Computed Tomograph (CBCT) and Comparison of Cortical Bone Thickness among Different Facial Types using Cone Beam Computed Tomography. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalayam.
Jegan Kumar, C (2013) Accuracy of Bracket Positioning in Direct and Indirect Bonding Technique. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Jeyaraman, P (2011) Evaluation of Anterior Tooth Display in Rest Position & Smile, and Smile Characteristics in Dravidian Tamil Linguistic Population. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
John Wilfred Young, A (2019) Lip Prints and Palm Prints: The Barcode of Skeletal Malocclusion. Masters thesis, Best Dental Science College, Madurai.
Joseph, A (2011) Evaluation of Leptin Levels In Gingival Crevicular Fluid during Orthodontic Tooth Movement. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Joshua, R S (2020) An Invitro study on the Effect of Erbium, Chromium: Yttrium-Scandium-Gallium–Garnet Laser Enamel Etching with Varying Power Output and Irradiation Time on the Shear Bond Strength. Masters thesis, Chettinad Dental College & Research Institute, Kanchipuram.
Kakkad Krupali, Nitinbhai (2017) Comparing Effectiveness of Three Different Probiotics in Inhibition of Streptococcus Mutans in Plaque around Orthodontic Brackets: A Randomized Controlled trial. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Karikalan, N (2018) Evaluation of effectiveness of varnish containing fluoride and fluoride varnish with CPP-ACP in prevention of white spot lesions in patients undergoing fixed orthodontic therapy: An Invivo Comparative study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Kavitha, R (2011) Comparison of Shear Bond Strength after Thermocycling of Brackets Bonded using Two Different Moisture Insensitive Primers: An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Kayalvizhi, P (2022) UNSPECIFIED Masters thesis, Best Dental Science College, Madurai.
Khaniya Bharathan, (2016) Photographic Assessment of Facial Components in Facial Esthetics as percieved by Orthodontists, Artists and Photographers: An In Vivo study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Kishor Kumar, K N (2020) Comparative Evaluation of Rate of Orthodontic Tooth Movement by Varying the Timing of Therapeutic Extractions in patients Undergoing Fixed Appliance Therapy: An In Vivo study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Kowtham Raj, M (2019) Comparison of Intrusion of Maxillary Incisors using Three-Piece Intrusion Arch and Skeletal Anchorage: A Finite Element study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Kuttimani, A (2020) Preference of Profile Modifications in Subjects with Class II Division 1 Malocclusion among Orthodontists, General Dentists & Laypersons. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Laxmi Pritha, M (2022) UNSPECIFIED Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Lily, J (2019) Evaluation of Stress Distribution and Displacement in Skull with Miniscrew Supported Maxillary Expansion Device: A Finite Element Method (FEM) Analysis. Masters thesis, Ragas Dental College and Hospital, Chennai.
Madhan Mohan, A (2011) Bolton’s Anterior and Overall Tooth Size Discrepancy among different malocclusion groups in Chennai Population: An Epidemiological study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Madisetty Naga Raviteja, (2016) Evaluation of Midpalatal Suture Patency in Individuals of various age groups: A Cone Beam Computed Tomography study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Mahalakshmi, D (2012) Assessment of the Lower Labial Gingival Architecture and Its Relationship with Skeletal Parameters and Lower Incisor Inclination in Dravidian Population: An In-Vivo study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Mahalakshmi, R (2016) Efficiency and Treatment Outcome of Piezocision Assisted Orthodontics. Masters thesis, Ragas Dental College and Hospital, Chennai.
Maivizhi, R (2019) A Comparative evaluation of the remineralizing potential of a Probiotic tooth paste, Traditional Yoghurt and a Novamin containing tooth paste on post-orthodontic white spot lesions using Scanning Electron Microscope and Energy Dispersive X-ray analysis: An In vitro study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Mangaleswari, M (2018) Comparison of the effects of self ligating versus conventional McLaughlin, Bennett and Trevisi brackets in the correction of lower anterior crowding in Periodontally Accelerated Osteogenic Orthodontics: A prospective study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Manikandan, N (2013) Effective En-Masse retraction of maxillary dentition with tuberosity mini-implant anchorage: A finite element analysis. Masters thesis, Ragas Dental College and Hospital, Chennai.
Manju Devi, S K (2022) UNSPECIFIED Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Mathew, S chericken (2018) Effect of miniscrew implant design characteristics and bone properties on insertion torque for primary stability: An Invitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Megha, T R (2020) Comparison of Soft Tissue and Hard Tissue Laser in Debonding Ceramic Bracket: An Invitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Meiyappan, N (2015) Comparison of mechanical properties and surface characteristics of space closure arch wires following fluoride treatment with topical fluoride gels and fluoride mouthrinses : An Invitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Mohamed Yaseen, R (2016) Comparison of Shear and Tensile Bond Strength between Laser Etched Brackets and Mesh Base Brackets using Nano Bonding Agents: An In Vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Mohammed, Bava (2017) Reproducibility of natural head position in frontal and profile view photograph using mirror method with and without cephalostat: An In-vivo study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Mohnish Kumar, S (2019) Cytotoxicity of 3D Printed Materials: An In Vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Muthu Pradeep, R L (2020) A Comparative In Vivo Assessment of Bracket Bond Failure Rate with Two Moisture Insensitive Primers. Masters thesis, Ragas Dental College and Hospital, Chennai.
Nagappan, P L (2017) Establishment and Comparison of Skeletal, Dental and Soft Tissue Norms for North and South Tamilnadu Population: A lateral Cephalometric study. Masters thesis, Best Dental Science College, Madurai.
Nagarajan, D (2007) Comparison of Superelasticity of different Austenite active Nickel Titanium Orthodontic Archwires using Mechanical Tensile Testing and correlating with Electrical Resistivity of the same Archwires. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Nalini, D (2017) Assessment of Antibacterial Property of Silver Coated Stainless Steel Orthodontic Brackets against Streptococcus Mutans, Lactobacillus Acidophilus and Porphyromonas Gingivalis: An In Vitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Nandini, K (2020) Evaluation of Factors Influencing the Placement of Mini Implants in Infrazygomatic Crest Region. Masters thesis, Ragas Dental College and Hospital, Chennai.
Nazeena Sheea Parveen, B (2020) Comparative Evaluation of the Accuracy of Placement of Orthodontic Brackets: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Neeraja, Kurup (2018) Evaluation of smile esthetics using dimensional analysis: An In Vivo study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Niranjana, R (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Nithya, P (2020) Evaluation of Maturation Stages of the Mid Palatal Suture in Post Adolescents in Tamilnadu Population using Cone-Beam Computed Tomography. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalyam.
Nivedhitha, V (2022) Comparison between the Craniocervical Angle, Hyoid Bone Position and Lower Incisor Crowding: An Invitro study. Masters thesis, Tagore Dental College and Hospital, Chennai.
Nupur Arathi, G (2013) Evaluation of moment-force ratio of two different loops: A finite element study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Palindla Lakshmi Prasanna, (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Pandeeswaran, R (2020) Evaluating the Accuracy of the Slot Dimensions, Tip and Torque Value of MBT Prescribed Metal Brackets Available in Indian Market: A Scanning Electron Microscopic study. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalyam.
Pandi, G (2022) UNSPECIFIED Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Peddada Revathi, (2016) Evaluation of Cytotoxicity of Orthodontic Mini Implants in Two Different pH Concentrations: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Prabhakaran, M (2015) Evaluation of smile characteristics in individuals with different age groups. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Pradeep Kumar, D (2020) Evaluation of Pterygomaxillary Suture using Human Adult Dried Skulls. Masters thesis, Ragas Dental College and Hospital, Chennai.
Praveenkumar, V (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Preethi, K (2018) Assessment of treatment of post orthodontic white spot lesion with microabrasion and laser using spectrophotometer: An Invitro study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Preeti, Prabhakaran (2015) Identification of Palatal Rugae in Maxillary Anteroposterior Dysplasia. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Prema, A (2017) Occlusal Bite Force Changes during Fixed Orthodontic Treatment in Different Vertical Facial Morphology. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Prince Jayasing Christopher, J (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Priyanga, M (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Priyangha, R (2022) A Comparative study of Three Fluoride Releasing Orthodontic Bracket Adhesives: A Randomized Clinical Trial. Masters thesis, Chettinad Dental College and Research Institute, Kanchipuram.
Rahul, M (2015) Effects of at-home and in-office bleaching on the shear bond strength of metal, ceramic and composite brackets to enamel: An In vitro study. Masters thesis, Sree Mookambika Institute of Medical Sciences, Kulasekharam.
Raja Lakshmi, T (2022) UNSPECIFIED Masters thesis, Sri Venkateswara Dental College and Hospital, Chennai.
Rajesh, R (2017) Bone Mapping of the Mandibular Buccal Shelf: A CBCT study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Rajkumar, R (2015) Effect of two different concentrations of papain solution on orthodontic bracket bonding with two different adhesives: An In vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Ram Prakash, G (2016) Intrusive Effect on Molar using Miniscrews. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Ramya, M (2020) Comparative Evaluation of Probiotic and Chlorhexidine Mouthwashes Effect on the Adhesion of Streptococcus Mutans on Stainless Steel Brackets: A Clinical Trial. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Ramya Chandran, (2022) UNSPECIFIED Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Ranganathan, R (2011) Evaluation of Frictional Forces Generated between Three Different Ligation Methods with Four Different Sizes of Orthodontic Archwires: An In Vitro Study. Masters thesis, J.K.K. Nataraja Dental College, Komarapalayam.
Rathi Amey, Jayant (2011) Micro-Implants Biomechanics: A Comparative Study to Assess Variations in Anterior Tooth Movement using Different Height of Retraction Hooks. Masters thesis, Ragas Dental College & Hospital, Chennai.
Ravanth Kumar, C (2013) Evaluation of the effects of Orthodontic Tooth Movement on the Levels of Interleukin - 10 in Gingival Crevicular Fluid. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ravindra Kumar, Jain (2011) Comparison of the Intrusion Effects on the Maxillary Incisors among Implant Anchorage, "J" hook headgear and utility arch. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Rehna Parveen, N (2018) Effectiveness of Nanohydroxyapatite dentrifice and fluoridated dentrifice on enamel surface roughness after orthodontic debonding: An in vitro study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Rinosh, Thomas (2013) Comparison of Static Frictional Characteristics of Molybdenum Disulfide Coated and Uncoated TMA and Stainless Steel Rectangular Archwires in the Dry State: An In Vitro Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kanyakumari.
Rishi, Raghu (2018) Evaluation of diagnostic accuracy of digital models. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ritika, Kailey (2011) Levels of Rankl and OPG In Gingival Crevicular Fluid during Orthodontic Tooth Movement. Masters thesis, Ragas Dental College & Hospital, Chennai.
Rizwan Ahmed, Abdul Kalam (2013) Effects of Rapid canine distalization through distraction of periodontal ligament using single mid-palatal distractor and comparing bone density of distracted segment by cone beam computed tomography (CBCT). Masters thesis, Tamil Nadu Govt Dental College & Hospital, Chennai.
Roopa @ Kunthavai, C (2015) Assessment of degree of treatment difficulty of maxillary canine impaction using KPG index and to analyse lateral incisor root resorption by 3D CBCT: A retrospective study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Sabitha, R Nair (2012) Evaluation of moment-to-force characteristics of preactivated symmetrical t-loop made of two different alloys: An in-vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Sagaya Mary Priya, R P (2022) Effect of Platelet Rich Fibrin on the Rate of Orthodontic Tooth Movement: A Randomized Clinical Trial. Masters thesis, Chettinad Dental College and Research Institute, Kanchipuram.
Sam Prasanth, S (2018) Airway evaluation before and after application of Implant supported palatal expansion Vs conventional palatal expansion using Computational fluid dynamics (CFD). Masters thesis, Ragas Dental College and Hospital, Chennai.
Samala Abhinaya, (2022) UNSPECIFIED Masters thesis, Sri Venkateswara Dental College and Hospital, Chennai.
Sanchana, N (2022) UNSPECIFIED Masters thesis, J.K.K. Natarajah Dental College and Hospital, Komarapalayam.
Sangeeth, K (2017) Evaluation and Comparison Of Salivary Dehydroepiandrosterone (DHEA) Levels and Cervical Vertebral Maturation Stages at Pre-Pubertal, Pubertal and Post-Pubertal Stages of Growth. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Sangeetha, Duraisamy (2005) Comparative evaluation of fluoride release and shear bond strength of a polyacid - modified composite resin, a resin modified glass ionomer cement and a conventional composite resin: An Invitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Sangeetha, M G (2015) Comparative study of rate of retraction and molar control between Dual Dimensional wires and Rectangular wires during retraction, using Miniscrews. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Santhosh Reddy, B (2011) Comparative Study of Mandibular Morphology in Patients with Hypodivergent, Hyperdivergent and Average Growth Patterns: A Cephalometric Study. Masters thesis, J.K.K. Nataraja Dental College, Komarapalayam.
Saranya, A (2020) Comparative study of Shear Bond Strength and Surface Changes with Labial and Lingual Brackets: An In Vitro study. Masters thesis, Madha Dental College and Hospital, Chennai.
Saravanan, K (2016) Quantification and Comparison of Adhesive Remnant and Degree of Enamel Loss After Debonding and Clean Up Under Two Adhesive Systems Using Optical Coherence Tomography: An In Vitro study. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalayam.
Saravanan, V (2012) Self-ligating Vs conventional twin brackets during En-masse space closure with frictionless mechanics. Masters thesis, Ragas Dental College and Hospital, Chennai.
Sasirekha, A (2020) Evaluation and Comparison of Slot Dimensions of Ceramic and Conventional Metal MBT Brackets among Three Different Manufacturers. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Selvarani, R (2011) Cephalometric Norms using McNamara Analysis in Tamilnadu Young Adults. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Senthil Kumar, V (2015) Evaluation of changes in hyoid bone position and pharyngeal airway dimensions following mandibular setback surgery: A Cephalometric study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Shahab Mohammed, (2019) A Cross Sectional study on the relationship between Posed Smile Width and Lower Facial Height in Tamilnadu population. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Shailaja, R (2018) Efficacy of sugar-free chewing gum containing CPP-ACP on Prevention of demineralization around fixed orthodontic brackets: An In Vivo study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Shalini, G Jain (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Shamara Aysha, S (2020) Evaluation and Comparison of the total metal ion release between Stainless Steel Brackets and Ceramic Brackets with Metal Inserts in artificial saliva, at different pH levels: An In-Vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Shanthini, R (2020) Color Stability of Ceramic Brackets Immersed in Artificial Saliva and A Potentially Staining Health Drink Solution: An Invitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Sharanyadhevi, K T (2016) Three Dimensional Evaluation of Stress Distribution and Displacement by Miniscrew Implants Assisted Palatal Expander: A Finite Element study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Sharmila, C (2022) A Cross Sectional Assessment of Photographic & Cephalometric Craniofacial Measurements in Dravidian Population. Masters thesis, Vivekananda Dental College For Women, Tiruchengode.
Sharmila, R (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Sharmilaa, S (2017) IGF-1 and VEGF in Saliva and Its Relation with CVMI Stages in Determining the Skeletal Maturity. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Sheril Selvan, (2019) Evaluating the Effect of Miniscrew Implant Assisted Micro-Osteoperforation on Orthodontic Root Resorption: A Histological study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Shireen, Cox (2015) Changes in alkaline phosphatase levels in gingival crevicular fluid and saliva following en-masse retraction: A Comparitive study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Shreevidhya Vijayan, (2019) Skeletal Maturity Assessment by Correlating Salivary Insulin like Growth Factor-1 with Middle Phalanx of Third Finger Staging. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Shylaja, R (2007) Evaluation and comparison of frictional resistance between conventional brackets and self ligating brackets designs using standardized arch wires and dental typodonts: An Invitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Silambu, M R (2022) UNSPECIFIED Masters thesis, J.K.K. Natarajah Dental College and Hospital, Komarapalayam.
Sindhu, E (2019) Efficacy of Different Remineralizing Agents on Artficially Created White Spot Lesions: An In Vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Sivasubramanian, J (2013) Evaluation of Gingival Crevicular Fluid and Saliva as Comparative Markers in the Expression of Interleukin -1 β during orthodontic Tooth movement: A In Vivo study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Smitha Roose, R (2016) An Invitro Study to Evaluate the Antibacterial Property and Shear Bond Strength of an Orthodontic Adhesive Combined with Two Different Nanoparticles. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Somya, Wilson (2020) Effect of Silver and Titanium Nanocoating on Frictional Properties of Stainless Steel Archwire: An In Vitro study. Masters thesis, Chettinad Dental College & Research Institute, Kanchipuram.
Sreesan, N S (2012) Quantitative assessment of buccal cortical bone thickness in South Indian population for miniscrew implant placement using computed tomography: An in vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Sri Meenakshi, R B (2017) Comparison of Shear Bond Strength of Orthodontic Metal and Ceramic Brackets Bonded Using Monowave and Polywave Light Emitting Diode Curing Units: An Invitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Sriman Vishnu, E (2022) Enamel Deproteinization as an Effective Bond Survival Rate Enhancer of Orthodontic Brackets Bonded with Conventional Composites: A Split Mouth Randomised Clinical Trial. Masters thesis, Chettinad Dental College and Research Institute, Kanchipuram.
Subashri, K (2020) Comparative Evaluation of Smile Characteristics in Dravidian Versus North East Indian Population. Masters thesis, Madha Dental College and Hospital, Chennai.
Subu, Thomas (2011) Evaluation of Frictional Characteristics of Four Commercially Available Self-Ligating Brackets: An In-Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Suganya, S (2017) Measurement and Comparision of Bracket Transfer Accuracy of Five Indirect Bonding Techniques: An In Vitro study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Sujatha, P (2017) Evaluation of Mechanical Properties of Conventional and Esthetic Aligning Arch Wires: A Comparative Invitro study. Masters thesis, Best Dental Science College, Madurai.
Sumin, S G (2020) Evaluation and Comparison of Constraining Force Produced during Alignment Phase using Self Ligating Brackets. Masters thesis, Ragas Dental College and Hospital, Chennai.
Suresh, K (2013) Comparision of Direct Bonding Technique Versus Indirect Bonding Technique on Bond Failure Rate using Light Cure Adhesive: An In Vivo Study. Masters thesis, Sri Ramakrishna Dental College & Hospital, Coimbatore.
Surya, R Krishnan (2018) An In vitro study to evaluate the frictional characteristics and surface topography of two different arch wires coated with silver nano particles using passive self ligating brackets. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Sushmitha, R Iyer (2018) Efficiency of the flip lock herbst appliance in management of angle's class II division 1 malocclusion on a class II skeletal base due to retrognathic mandible. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Swathy, S (2018) Bone mapping in the infrazygomatic region for ideal placement of TADS – A CBCT study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Syed Aafaque, J (2020) Reliability of Frontal Sinus Morphology with Cervical Vertebral Maturation for the Assessment of Skeletal Maturity. Masters thesis, Best Dental College Science, Madurai.
Tamilselvi, B (2017) Root Resorption Before and After Orthodontic Treatment: A Retrospective Comparative study between Class I, Class II Division 1 Malocclusion on Class I Skeletal Base and Class I, Class II Division 1 Malocclusion on Class II Skeletal Base. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Thailavathy, V (2010) Association between The British Standards Institute’s Incisor Classification of Malocclusion and Angle’s Classification of Malocclusion: An Analytical study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Thasneem, A (2019) Effect of Time on Bond Strength of Lingual Brackets in Indirect Bonding with Different Base Composite and Sealant Combinations: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Thirunavukkarasu Geetha, - (2011) A comparison of plaster, digital and reconstructed study model accuracy. Masters thesis, Ragas Dental College and Hospital, Chennai.
Toshit, Kumar (2011) Relationship between Four Epidemiological Indexes - indexes of complexity, outcome and need, dental aesthetic index, peer assessment rating index, and American Board of Orthodontics objective grading system: A Comparative study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Unais, K T (2019) Evaluation of Stiffness and Plastic Deformation of different Clips/Springs of Self Ligating Brackets after Repetitive Opening and Closure Movements. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Vaishnav, Sunderraj (2020) Comparing the Effect of Three Different Primers on Shear Bond Strength of Metal Brackets Bonded using Transbond XT Adhesive: An Invitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Valliammai, L (2022) UNSPECIFIED Masters thesis, C.S.I. College of Dental Sciences and Research, Madurai.
Varun, Peter (2017) Comparison of the Efficacy of Mandibular Permanent First Molars and Incisors as Predictors of Mandibular Canine and Premolar Widths with Moyer’s and Tanaka-Johnston Analysis in Class I Malocclusion Patients in Chennai Population. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Varuna, V Sivadas (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Vasanthavalli, D (2022) Comparison of Tongue Volume in Different Dentoskeletal Patterns using Three Different Methods. Masters thesis, Madha Dental College, Chennai.
Vashi, Shailendrasinh (2011) Three Dimensional Evaluation of Discrepancy between Maximum Intercuspal Position and Centric Relation. Masters thesis, Ragas Dental College & Hospital, Chennai.
Veera Sankar, S (2017) Evaluation of Rate of Space Closure, Arch Dimensional and Axial Inclination Changes between Self -Ligating and Conventional Brackets: A Prospective Clinical Trial. Masters thesis, Ragas Dental College & Hospital, Chennai.
Vidhu, S (2017) To Evaluate the Effect of Light Curable Fluoride Varnish on Enamel Demineralization during Orthodontic Treatment. Masters thesis, Ragas Dental College & Hospital, Chennai.
Vidhya, S (2019) Labial Bone Thickness in Maxillary and Mandibular Anterior Region: A CBCT study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Vidhyashree, M (2022) Comparison of Shear Bond Strength between Metal and Ceramic Bracket on Zirconia Surface with Two Different Adhesion Promotors: An Invitro study. Masters thesis, Tagore Dental College and Hospital, Chennai.
Vijayakumar, N M (2013) Comparative Study of Changes in Pharyngeal Airway Dimension and Hyoid Bone Position following Nonsurgical Orthodontic Treatment in Class I and Class II Subjects. Masters thesis, Tamil Nadu Govt Dental College and Hospital, Chennai.
Vijayashri Sakthi, S (2013) Efficiency and Treatment Outcome of Corticotomy Assisted Orthodontics. Masters thesis, Ragas Dental College and Hospital, Chennai.
Vijayasri, M (2019) Critical Evaluation of Micro-Osteo Perforation (MOP) Assisted Orthodontic Tooth Movement by Varying the Frequency of Micro-Osteo Perforation (MOP): An In Vivo Comparative study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Vijjaykanth, - (2006) Correlating position of Hyoid Bone and Mandible to Third Cervical Vertebra in patients with Class I, Class II and Class III skeletal malocclusion: A Cephalometric study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Vineesha, B N (2017) Evaluation and Comparison of the Effectiveness of Piezocision and Corticotomy during Individual Canine Retraction: A Split Mouth study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Vinobharathi, R (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Vinoth, S (2012) Quantitative analysis of root damage and repair following placement of miniscrew using scanning electron microscope and energy dispersive x-ray analysis. Masters thesis, Ragas Dental College and Hospital, Chennai.
Vora Sheelkumar, Rashmikumar (2012) Evaluation of angular deviation of miniscrew implants using cone beam computed tomography: An in vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
