 | Up a level |
Aarthy, S (2019) Evaluation of the Flexural Strength of Heat Polymerized Poly (Methyl Methacrylate) Denture Resin Reinforced With Fibres: An In Vitro Study. Masters thesis, Madha Dental College and Hospital, Chennai.
Abdul Rafe, - (2012) Comparative evaluation of the shear bond strength of the bond between ceramic and enamel pretreated with different etching methods: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Abiramy Bharathi, J (2013) Comparative Evaluation of the Effect of Cyclic Loading on the Reverse Torque Values of Abutment Screws for Premachined Titanium and Zirconia Abutments: An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Aishwarya, K (2020) Comparative Evaluation of the Sealing Ability of Two Different Sealing Agents on the Microgap at the Implant – Abutment Interface following Cyclic Loading: An Invitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ajai, M R (2016) Comparitive evaluation of marginal fit of zirconia copings fabricated using two different CAD systems with one CAM system: An In-vitro study. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalayam.
Amalorpavam, V (2019) Comparison of Marginal fit and Internal adaptaion of copings fabricated with polyetheretherketone (PEEK) and Zirconia: An In Vitro Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Ambedkar, E (2016) Comparative Evaluation of the Rigidity and Accuracy of Different Elastomeric Impression Materials with Open Tray Implant Level Impression Technique: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Anil Kumar, P (2011) Comparative evaluation of the fracture resistance and fracture patterns of endodontically treated anterior teeth restored with two different esthetic posts: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Anjelin Glory, N (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Annapoorni, H (2005) Effect of Thermocycling on the Flexural Strength of Porcelain Laminate Veneers. Masters thesis, Meenakshi Ammal Dental College, Chennai.
Anumitha, S (2022) Combined Effect of Aging and Sterlization on the Accuracy of Two Types of Torque Wrenches: An In Vitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Anupriya, A (2022) A Comparative Evaluation of Shear Bond Strength of Veneered Ceramic on Zirconia Core, with Various Surface Treatment: An In Vitro study. Masters thesis, Chettinad Dental College and Research Institute, Kanchipuram.
Aparna, Mohan (2012) A Comparative Evaluation of the Fracture Resistance of Five Different Dowel Systems in Endodontically Treated Mandibular First Premolars: An In Vitro Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Arul Kumar, S (2016) Comparison of Surface Roughness of Injection Moulded and Compression Moulded Heat Polymerized Acrylic Resin after Subjecting them to Different Polishing Methods: An In Vitro Study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Arun, R (2013) A Comparative evaluation in different types of treatments on Titanium alloy samples with or without Gentamicin and its effect on Biofilm - An In Vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Arya, Sukumaran (2020) An Invivo study to Compare the Difference in Speech Sounds Observed with Conventional and Customized Palatal Contour Dentures: A Hospital Based study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Ashna, S (2020) Evaluation and Comparison of Different Abutment Level Impression Techniques using All-On-Four Implant Treatment Protocol: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Ashwini, S (2022) Prevalence of Colour Vision Deficiency and Ability to Differntiate Colour among Dentists: In Vivo study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Ashwini Sukanya, GU (2018) Comparative evaluation of the microgap at the implant-abutment interface with premachined and customized laser-sintered cobalt-chromium abutments: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Asish, M (2019) Evaluation of the Bioactivity of Surface Modified Polyetheretherketone (PEEK) as an Implant Material: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Aswana, J J (2016) Comparative Evaluation of the Wear Resistance of Different Materials used for Provisional Implant Supported Restorations: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Badimela Arjun, (2019) Comparative Evaluation of the Push-Out Bond Strength of Glass Fiber Reinforced Composite Resin Post and Modified Polyetheretherketone (PEEK) Post following Surface Treatments: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Balamurugan, T (2011) Evaluation of Accuracy of Casts Obtained from Various Implant Impression Techniques: An Invitro Study. Masters thesis, J.K.K. Nataraja Dental College, Komarapalayam.
Bhanu Chander Vayadadi, (2016) Comparative Evaluation of the Marginal and Internal Fit of Cast Co-Cr Copings Fabricated from Conventional and Milled Wax Patterns: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Biju, K A (2019) Comparative Evaluation of Pressure Generated on a Maxillary Model by Different Impression Materials using Custom Trays Fabricated with Different Thickness of Wax Spacer: An In Vitro Study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Cathryn Beryl Padma, Felix (2020) A Comparative study on the Marginal Fit of Direct Metal Laser Sintered Crowns (DMLS) Fabricated with Conventional Impressions and Digital Impressions. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Celin Joel, C (2020) Effect of Different Surface Preparations on the Bonding of a Gingival Shade Composite to Denture Base Resin Before and After Thermocycling: An Invitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Cherry, Anmol (2009) Comparative evaluation of the effects of two ceramic finishing systems and diamond polishing paste on the surface roughness of two ceramic materials used for ceramo-metal restorations: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Deepak Kumar, B (2019) A Comparative Study to Evaluate the Effectiveness of Two Different Surface Treatments on the Retention of Zirconium Copings: An In Vitro Study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Deepiha, D (2020) Comparison of Adhesive Strength of Maxillofacial Silicone Adhesive on Normal Skin and Burn Scar Skin: A Clinical study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Deeptha Mathi, R (2022) Comparative Evaluation of the Fit Accuracy at the Implant Abutment Interface between Prefabricated and Customized Abutment Fabricated using Three Different Techniques: An In Vitro study. Masters thesis, C.S.I. College of Dental Sciences and Research, Madurai.
Dhanapriya, G (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Dheepika, K (2020) Evaluation and Comparison of Flexural Strength of Composite Resin Material Reinforced with Continuous E-Glass and S-Glass Fibres: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Dhivya Priya, J (2019) Effect of Aging and Thermocycling on Flexural Strength of Poly Ether Ether Ketone (PEEK) as a Provisional Restoration for Full Mouth Rehabilitation: An Invitro Comparative Study. Masters thesis, CSI College of Dental Sciences and Research, Madurai.
Ebinu, A (2018) Comparison of shear bond strength of veneering ceramic to zirconia after surface treatment with air abrasion and laser treatment: An In vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Edilbert Raja, I (2017) Accuracy of Fit of Screw Retained Implant Super Structures Cast from Conventional Vs 3D Printed Pattern : An In Vitro Study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Egammai, S (2011) Evaluation of Bite Force and Masticatory Performance in Patients Rehabilitated with Tooth-Supported Overdentures. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Elakkiya, S (2018) Influence of dental chair backrest inclination on the three dimensional positioning of the mandible: A Clinical Trial. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Elavarasan, S (2017) Evaluation of Elevator Muscle Activity using Electromyography in Patients Restored with Fixed Partial Denture in Group Function Occlusion and Canine Guided Occlusion. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Eshona Pearl, E (2016) Adherence of Streptococcus Mutans on Titanium Substrates Surface Modified by Laser and Acid Etching Technique: A Comparative In Vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Eswaran, B (2012) Comparative evaluation of the marginal gap and internal gap of Co-Cr copings fabricated by different techniques: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Femin, David (2020) A Comparative Radiographic Evaluation of Crestal Bone Height following Titanium Implant placement in flap and flapless procedure: An In vivo study. Masters thesis, Sree Mookambika Institute of Denal Sciences, Kulasekharam.
Francilin, F (2020) Correlation between Natural Tooth Shade and Scleral Shade using Vita Toothguide 3D-Master Shade Guide and Digital Photography. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Ganagamani, A T (2019) Comparison of Dimensional Accuracy of Open Tray and Closed Tray Impression Techniques while using Multi-Unit Abutments in Dental Implants. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Gayathree, Alarigiswamy (2018) Comparative evaluation of the effect of different surface treatments on the bioactivity of zirconia: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Gayathri, S (2020) Evaluation of Accuracy of Implant Impression with Different Trays and Materials: An In Vitro study. Masters thesis, Madha Dental College and Hospital, Chennai.
Gayathri Devi, K (2022) Comparison of Bone Volume Changes and Implant Stability in Mandibular Posterior Immediate Extraction Sockets With and Without Bone Graft and L-PRF: A Randomized Controlled Clinical Trial. Masters thesis, Chettinad Dental College and Research Institute, Kanchipuram.
Geetha, K R (2006) Effect of various sprue designs on the properties of base metal alloy castings. Masters thesis, Ragas Dental College & Hospital, Chennai.
Geetha, S (2012) A Comparative study to evaluate the adherence potential of candida albicans on conventional heat cure polymethyl methacrylate resin and flexible denture base resin. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Geetha Kumari, R (2017) Assessment of Oral Stereognosis and Patient Satisfaction in Complete Denture Wearers: An In Vivo study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Gnanavel, A (2020) Comparative Evaluation of Accuracy of Conventional and Digital Impression Techniques for Implants Placed With and Without Angulation: An In-Vitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Gowthama Raaj, K C (2018) Comparative evaluation of implant designs influence of diameter, length and taper on stress and strain in the mandibular segment: A three dimensional Finite Element Analysis. Masters thesis, J.K.K. Nataraja Dental College and Hospital, Komarapalayam.
Gowthami, G R (2022) Comparative Analysis of Stress Patterns in D3 Bone with Various combinations of Implant abutment connections using Finite Element Analysis. Masters thesis, C.S.I. College of Dental Sciences and Research, Madurai.
Hareesh, M H (2017) In vitro evaluation and comparison of color stability, flexural strength and polymerization shrinkage using three provisional materials in crown and bridge. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalayam.
Harish, Gopal (2013) Comparative Evaluation of Mechanical Properties of Base Metal Alloys and Commercially Pure Titanium with effect of Laser Surface Treatment: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Harishnath, V (2007) Evaluation of the tensile and peel bond strength of the silicone and acrylic soft liner following denture base surface treatment: An In Vitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Inita, N G (2022) Evaluation of Flexural Strength of Heat Cure Denture Base Material Reinforced with 1wt% of Different Nanoparticles and Sizes: An Invitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Ishwarya, B (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Janani, D (2018) Comparative evaluation of the shear bond strength between repair composite resin bonded to bilayered and monolithic ceramic restorations: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Janani, S (2012) Evaluation of colour stability of flexible denture base resin in four commonly used food substances. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Jaya Bharathi, T (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Jeevitha, Mani (2020) Comparative Evaluation of Fracture Strength of CAD/CAM Anterior FPD Framework Made with Zirconia and Peek Cemented using Resin Cement: An In-Vitro Study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Jenefer Shekina, D (2020) Comparative Evaluation of the Marginal Fit and Internal Fit of Metal Laser Sintered Crowns with Direct and Indirect Scanning Techniques: An Invitro study. Masters thesis, Chettinad Dental College & Research Institute, Kanchipuram.
Jennifer Floria Vincent, (2022) The Evaluation of Masseter Muscle Thickness in Complete Denture Users among South Indian Population. Masters thesis, Madha Dental College, Chennai.
Jensy Sara George, (2019) Comparative Evaluation of the Effect of Splinting Materials with Implant Impressions on All-On-Four Treatment Protocol: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Jill, Vadodaroa (2018) Clinico-radiographic analysis of condylar guidance obtained from cone beam computer tomography and three different clinical methods: A Comparative study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Jithin, G N (2019) Effect of Different Types of Interim Cements on Shear Bond Strength of Zirconia Blocks Luted with Resin Cement on Dentin Surface: An In Vitro Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Joephin Soundar, S I (2013) Analysis of Fracture Resistance of Endodontically treated Teeth Restored with Different Post and Core System of Variable Diameter - An In Vitro Study. Masters thesis, Rajas Dental College and Hospital, Kavalkinaru.
Josna Susan, Joy (2012) Comparison of Mechanical Properties, Physical Properties & Biocompatibility of Four Different Denture Base Resins: An In Vitro Study. Masters thesis, Rajas Dental College & Hospital, Tirunelveli.
Jyothsna, S Reddy (2013) Influence of Open Tray Implant Level Impression Coping Designs on the Rotational Resistance Offered by Three Different Impression Materials - An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Kabilan, P (2020) Comparison of Cutting Efficiency between Normal Tapered Diamond Points and Spiral Tapered Diamond Points: An In-Vitro study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Kamalashankar, P (2016) Comparative Evaluation of Stability of Two Different Forms of Immediately Loaded Implants Supporting a Fixed Full Arch Prosthesis: An In-Vivo Study. Masters thesis, Rajas Dental College & Hospital, Tirunelveli.
Kanmani, M (2018) Effect of S Glass Fibre Reinforcement on the flexural properties of composites: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Kanmani, M (2007) The Influence of putty wash impression technique on dimensional accuracy of 2 commercially available vinyl poly siloxane impression materials - An Invitro study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Karrunakaran, B (2016) A comparison of marginal accuracy of commercially available inlay wax, auto-polymerized & light- polymerized pattern resin material before and after fabrication of casting: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Karthick, P A (2019) Compare the Translucency of Zirconia Based Ceramics with Different Core and Veneer Thickness Combination: An In Vitro Study. Masters thesis, Madha Dental College and Hospital, Chennai.
Karthik, V C (2017) Randomized Controlled Study on Effect of Concentrated Growth Factors on Crestal Bone Levels and Peri-Implant Bone Density in Dental Implants. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Karthikeyan, K (2006) Comparative evaluation of dimensional stability of three types of interocclusal Recording materials: An Invitro study. Masters thesis, Meenakshi Ammal Dental College, Chennai.
Kasthuri, S (2019) Effect of S-Glass Fibres on the Flexural Strength of Acrylic Resins used for Temporary Restorations: An In Vitro Study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Kavi Malar, (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Kayathri, A (2019) Comparative Evaluation of Positional Accuracy of Implants with Two Different Splinting Materials using Two Different Elastomeric Impression Materials: An Invitro Study. Masters thesis, CSI College of Dental Sciences and Research, Madurai.
Kirubha, P (2022) Comparative Analysis of Force Distribution with Three Different Restorative Crown Materials D4 Bone Quality using Finite Element Analysis. Masters thesis, C.S.I. College of Dental Sciences and Research, Madurai.
Kiruthiga, V P (2018) Evaluation of von mises stresses in four bone qualities in an implant supported mandibular posterior crown by 3D finite element analysis. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Kiruthika, S (2022) Evaluation of Anatomical Co-Relation between Inferior Alveolar Canal & Mylohyoid Ridge: In Vitro study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Krishnasuthan, S (2020) The Effect of Surface Treatments on the Shear Bond Strength of a Polyamide Denture Base Resin to a Chairside Reline Resin: An Invitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Kumaran, C (2016) Influence of Connector Design on Fracture Resistance of Two Commercially Available all Ceramic Fixed Partial Dentures using CAD/CAM. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Laju, S (2011) Comparative evaluation of shear bond strength of veneering porcelain to base metal alloy and zirconia substructures before and after aging: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Lakshmi Devi, M (2011) A Comparative study of shear bond strength of repaired porcelain fused metal restorations and its interface adaptation: An In Vitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Lalitha Manohari, V (2019) Effect of Ultrasonic Instrumentation on the Retentive Strength of Zirconia Crowns Luted with Glass Ionomer and Adhesive Resin Cements With and Without Air Abrasion: An Invitro Study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Lata, S Mushannavar (2013) Comparative Evaluation of Shear Bond Strength of the Porcelain Laminates using Different Surface Treatments - An In-Vitro Study. Masters thesis, Tamilnadu Govt. Dental College and Hospital, Chennai.
Lawrance, S (2019) A Comparative Evaluation of Flexural Strength of Three Commercially Available Flexible Denture Base Resins: An In Vitro Study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Lenapriya, A (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Madhu Mahadevan, S (2013) Effect of Different Concentrations of Sodium Chloride on the Corrosion Behavior of Pure Titanium and Titanium Alloy Coupled with Gold Alloy and Nickel Chromium Dental Casting Alloy. Masters thesis, Rajas Dental College and Hospital, Kavalkinaru.
Mahesh, B (2012) Three Dimensional Finite Element Analysis of Stress Distribution around Implant with Straight and Angled Abutments in Different Bone Qualities. Masters thesis, Rajas Dental College & Hospital, Tirunelveli.
Maniamuthu, R (2019) Comparative Evaluation of the Wear Resistance of Two Different Implant Abutment Materials after Cyclic Loading: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Maniarasan, A (2018) To chart the color accuracy of DSLR camera in conjunction with the imaging software for excellence in fixed prosthodontics. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Manimala, M (2019) Effect of Implant Height Differences on the Retention and Wear Behaviour of Ball Attachment System in Mandibular Two-Implant Over Dentures: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Manimegalai, M (2022) To Compare and Evaluate the Surface Roughness, Colour Stability and Wear Resistance of Light Cured Composite Coating Material on Hybrid Ceramic Material and Composite Resin Denture Teeth. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Manoj, V (2010) A Comparative evaluation of bond strength and hardness of soft denture liners after thermocycling: An Invitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Manoj Kumar, P A (2017) A Cephalometric Study on the Relationship between the Occlusal Plane, Ala-Tragal Line & Camper’s Plane in Dentulous Subjects in Three Different Anatomical Head Forms. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Marciano John Vialli Paul, (2022) A Comparative Evaluation of Impact Strength, Flexural Strength, Compressive Strength and Micro Hardness of High Impact Heat Cured PMMA Resin Incorporated with Titanium Dioxide Nano Particles: An Invitro study. Masters thesis, J.K.K. Natarajah Dental College and Hospital, Komarapalayam.
Maria Singam, T (2015) Evaluation of occlusal harmony of fixed partial prosthesis fabricated by functionally generated path techniques using T-Scan: An In Vivo study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Meenatshi Muthiah, (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Megashyam, P (2016) Effect of Storage Time on Marginal Fit of Full Crown Patterns Made of Inlay Wax, Epoxy Resin, Autopolymerised Pattern Resin and Light Cured Pattern Resin. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Mithra, R (2020) Radiographic and Histologic Assessment of Eggshell Derived Hydroxyapatite as a Bone Graft Substitute in Extraction Sockets. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Mohammed, A (2014) Comparison of internal fit of metal copings fabricated with laser sintering technique and lostwax technique, pre and post firing: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Mohankumar, P (2013) Evaluation of Effect of Three Different Solutions on Mechanical Properties of Heat Cured and Micro Wave Cured Denture Base Resin: An In Vitro Study. Masters thesis, Tamilnadu Government Dental College, Chennai.
Muthukeerthana, R (2019) Effect of Food Stimulating Agents on Flexural Strength on Denture Base Resins: An In Vitro Study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Narendra Sathish, M D (2022) UNSPECIFIED Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Narmadha, D (2022) Comparative Evaluation of Flexural and Impact Strength of Denture Base Acrylic Resin Using Different Processing Methods: An In Vitro study. Masters thesis, Sri Venkateswara Dental College and Hospital, Chennai.
Nasreen, S (2018) Comparison of crestal bone level around one-piece and two-piece implants with immediate non-occlusal loading: A Split Mouth Design. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Naveen Kumar, T (2017) Effect of straight and angulated abutments on stress and strain around a platform switched implant placed in anterior maxilla: A finite element analysis. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Navin Bharathy, M (2020) A Comparison of the Accuracy of Impression Materials with Immediate and Delayed Pouring for Long Span Implant Supported Prosthesis: An Invitro study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Nazreen Banu, R (2022) UNSPECIFIED Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Neha, Sood (2011) Geometrical Analysis of Occlusal Plane using Frankfort Horizontal Plane: A Cephalometric Comparative Study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Nikhil, S Rajan (2013) Evaluation of Speech in Maxillary defects and Its Correction using Palatography: An In-Vivo Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulashekharam.
Nikhil, S Rajan (2013) Evaluation of Speech in Maxillarydefects and Its Correction using Palatography - An In-Vivo Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Nirmala, George Saibu (2011) Comparative Evaluation of the Effect of Surface Modifications of “PEEK” Abutments on the Retention of Implant Supported Provisional Restorations Luted with Two Different Luting Agents. Masters thesis, Ragas Dental College & Hospital, Chennai.
Nishanthini, A (2022) UNSPECIFIED Masters thesis, Sri Venkateswara Dental College and Hospital, Chennai.
Pallavi, Vashisht (2013) A Comparative Study of Horizontal Condylar Angle Value of Three Different Concepts through Computerised Digital Cephalometric Tracing. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Parimala, V (2009) Evaluation of marginal fit of metal ceramic and metal free ceramic crowns: An In Vitro study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Parvathy, Sachethanan (2018) An In-vitro study to compare the wear of natural tooth against two commercially available zirconia materials. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Parvez, Ahmad Khan (2013) Comparative Evaluation of Tensile Bond Strength of Luting Cements with Effect of Abutment Angulation on Retention of Cement-Retained Implant Supported Restorations - An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Pavya, B (2022) To Evaluate the Impact of Nocturnal Wear of Complete Denture and Quality Of Life in Obstructive Sleep Apnea. Masters thesis, Madha Dental College, Chennai.
Piyush, Javiya (2011) Evaluation of Shear Bond Strength of Four Commercially Available Resin Cements: In Vitro Study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Ponjayanthi, V (2020) A Comparative Radiographic Evaluation of Crestal Bone Levels following Immediate Loading of Single Piece and Two Piece Implant: An In vivo study. Masters thesis, Sree Mookambika Institute of Denal Sciences, Kulasekharam.
Pradeepa, P.M (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Praveen Sundar, J (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Praveena, K (2019) Evaluation of Lateral Condylar Guidance by Clinical and Radiographic Methods – Hanau’s Formula Revisited: An Invivo Study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Praveenekumar, R (2022) Effect of Aluminium Oxide Filler on the Flexural Strength and Surface Hardness of Denture Base Acrylic Resin Processed by Different Polymerization Techniques : An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Preethi Suganya, S (2019) Comparison of Spectrophotometric Evaluation of Shade Selection with Visual and Digital Method. Masters thesis, J.K.K. Nattraja Dental College and Hospital, Komarapalayam.
Preethy, Chandran (2013) An Invitro Study to Assess the Absorption and Release of Chlorhexidine from Acrylic Resin Discs Immersed in it thereby Simulating Clinical Treatment of Oral Candidiasis. Masters thesis, Tamilnadu Government Dental College, Chennai.
Priya, M S (2012) A Comparative evaluation of the Marginal Adaptation and Fracture Resistance of Three Different Types of Metal Free Ceramic Systems with Metal Crown: An In vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Priyadarshini, T (2018) Comparative evaluation of the masking ability of lithium disilicate ceramic with different core thickness on the shade match of indirect restorations over metallic substrate: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Priyanjali, Paul (2018) Evaluation of accuracy of transferring the maxillary occlusal cant using face bow of two semi-adjustable articulator systems in subjects with different facial types. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Priyanka, G (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Priyankaa, Pradip (2017) An In-Vitro Comparative Study of the Properties of Dental Stone Models Disinfected by Incorporation Technique and Immersion Technique. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Pushkar, Gupta (2007) The effect of monopoly coating agent on the surface roughness of a tissue conditioner subjected to cleansing and disinfection: A Contact Profilometric Invitro study. Masters thesis, Saveetha Dental College and Hospitals, Chennai.
Raagavi, T (2022) UNSPECIFIED Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Raajalakshmi, R (2022) Evaluation of In Vitro Cytotoxicity of Heat Cure Denture Base Resin with Tertiary Amine. Masters thesis, Vivekananda Dental College For Women, Tiruchengode.
Raghunathan, J (2017) Comparison of Bond Strength of Porcelain Laminate Veneers Bonded to Laser Treated Dentin and Acid Treated Dentin : An In Vitro Study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Raja Ganesh, N (2013) Comparative Evaluation of the Shear Bond Strength of Chairside Soft Liners to Denture Base Resin - An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Rajachitra, M (2020) Evaluation of Fatigue Resistance of Esthetic and Metal Clasps for Removable Partial Denture: An In Vitro study. Masters thesis, Madha Dental College and Hospital, Chennai.
Rajkumar, E (2013) Comparative Evaluation of Shear Bond Strength of Cast and Direct Metal Laser Sintered Co-Cr Alloy To Porcelain with the effect of Surface Treatments - An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Rajkumar, P (2017) Evaluation of Marginal Adaptation and Microleakage of Two Different Types of Zirconia Crowns with that of a Glass Ceramic Crown Luted with Resin Cement: A Comparative In Vitro Study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Rakshagan, V (2016) Influence of Platform Switching on Stress Distribution around Implant with Cantilever Prosthesis: A Photoelastic study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Ramkumar, K (2022) Evaluation of Bone Availability Skin Thickness, Size of the Ear and Relationship to the Cephalic Index for Selection and Placement of Implant in the Temporal Bone to Retain Auricular Prosthesis in Patients Having Auricular Defects attending Tamilnadu Government Dental College and Hospital: A Clinical study. Doctoral thesis, The Tamil Nadu Dr. M.G.R. Medical University, Chennai.
Ranjith Kumar, P (2006) Comparative evaluation of dimensional accuracy of dental casts obtained from three putty wash impression techniques and matrix impression technique: An Invitro study. Masters thesis, Saveetha Dental College and Hospitals, Chennai.
Rashmi Kumari, - (2011) Evaluation of Dimensional Stability of Four Commercially Available Addition Silicone Interocclusal Record Materials: In Vitro Study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Roseline, S P (2022) Evaluation and Comparison of the Transverse Strength and Residual Monomer Content of Two Different Heat Cure Denture Base Resins Processed by Different Polymerization Techniques: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Rubina, Ibrahim (2007) Comparative Evaluation of Corrosive Behavior of Four Commercially Available Nickel – Chromuim Alloys in Artificial Saliva by Cylcic Polarisation Test: An Invitro study. Masters thesis, Saveetha Dental College and Hospitals, Chennai.
Sahana, R (2022) A Comparison between Visual, Digital and Digital Photography Assisted Shade Selection: A Clinical study. Masters thesis, Tagore Dental College and Hospital, Chennai.
Saisa, Dand (2012) Comparison of Material Properties used for Interim Prosthesis in Fixed Dental Prosthesis: An Invitro Study. Masters thesis, J.K.K. Nataraja Dental College, Komarapalayam.
Sakthi Devi, A (2013) A Clinical Study to Correlate Oral Stereognosis and Denture Satisfaction in Complete Denture Patients. Masters thesis, Tamilnadu Government Dental College, Chennai.
Sakthi Gnanavel, S (2022) Comparative Evaluation of Various Splinting Materials on the Positional Accuracy of Multiple Transmucosal Abutments using Open Tray Impression Technique: An In Vitro study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Sakthi Prakash, S (2019) A Study to Evaluate the Horizontal Condylar Inclination in Dentulous Patients using Clinical and Two Radiographic Techniques. Masters thesis, Raja's Dental College and Hospital, Tirunelveli.
Samin Hallajmoghaddam Sarand, (2019) Comparative Evaluation of Effect of Tooth Brushing on the Surface Roughness and Colour Stability of Poly (Methyl Methacrylate) Heat Cure Denture Base Resin with the Application of Denture Surface Sealant: An In Vitro Study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Sangeetha, S (2011) Comparative evaluation of effects of two chemically different mouth rinses on the colour stability and surface topography of three esthetic veneering materials: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Sangeetha Meena, N (2017) Anthropometric Analysis of Anterior Maxillary Teeth using Digital Photography: An Institution Based Cross-Sectional Study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Sankara Krishnan, S (2012) Comparative Evaluation of Accuracy of Implant Level Impressions Obtained with Closed Tray Press Fit Impression Copings and Open Tray Splinted Impression Copings for Multiple Implants: An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Saranya, T (2020) Evaluation of Linear Dimensional Stability of Various Denture Base Resins subjected to Sterilization by Microwave Irradiation: An Invitro study. Masters thesis, Vivekanandha Dental College for Women, Tiruchengode.
Saravana Priya, M (2020) Evaluation of residual ridge and restorative space for diagnosing and determining implant placement options for overdentures in completely edentulous patients. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Selvan, - (2007) Comparison of tensile bond strength of two different resin cements used to bond base metal alloy to human enamel: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Sethu Raman, R (2018) Analysis of the interface formed by premachined cobalt chromium implant abutment base with cast on cobalt chromium alloy before and after simulated porcelain firing: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Shah, Darshan Jaydip (2013) Use of Occlusal Plane Analyzer in Dentate and Edentate Individuals to Measure Deviation from Ideal Occlusal Plane. Masters thesis, Tamilnadu Government Dental College, Chennai.
Shakila Nazreen Banu, (2022) Effectiveness of Esthetic Rehabilitation of Patients using Digital Smile Designing (DSD) Versus Conventional Anatomic Mock Up: An Invivo study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Shankar, A (2022) Effects of Soldering and Laser Welding on Bond Strength of Ceramic to Metal. Masters thesis, Tagore Dental College and Hospital, Chennai.
Shanmuga Priya, S V (2019) Comparative Evaluation of Retention and Stability of Implant Supported Mandibular Overdenture using Locator attachment at Different Implant Positions: An In Vitro Study. Masters thesis, K.S.R. Institute of Dental Science and Research, Tiruchengode.
Shanthi, C (2022) Effect of Quaternary Ammonium Compounds and Silver Nanoparticles on Tear Strength of Irreversible Hydrocolloid Impression Material: An Invitro study. Masters thesis, Vivekananda Dental College For Women, Tiruchengode.
Shine Manoj, D J (2015) Comparative evaluation of stress distribution around single piece and two piece titanium and zirconium implants - a three dimensional finite element analysis: An Invitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Shivani, M (2022) UNSPECIFIED Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Shyju Prasad, S (2022) Evaluation of Hemocompatibility of Dental Implants with Two Different Surface Treatments: An Invitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Shyma Rose, P D (2018) Comparative evaluation of surface detail reproduction and dimensional stability of poly ether, polyvinyl siloxane and vinyl polysiloxane ether impression materials: An In Vitro study. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Sibikumar, V (2022) UNSPECIFIED Masters thesis, Ragas Dental College and Hospital, Chennai.
Singh, Bishnupathi (2008) A Comparative Radiographic evaluation of occlusal plane in dentulous and edentulous subjects: A Clinical study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Siva Saranya, B (2012) Comparative Evaluation of Shear Bond Strength of Heat Polymerised Acrylic Resin to Surface Treated Cobalt-Chromium and Titanium Alloys: An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Sivakumar, D (2013) Evaluation of Bond Strength of Acrylic Denture Tooth to Heat Polymerized Denture Base Resin after Different Surface Treatments on the Bonding Surface of Acrylic Tooth: An In Vitro Study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Sobha, K (2011) Evaluation of stress distribution in fixed partial dentures with pier abutments using rigid and nonrigid connectors: A finite element analysis. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Soumya, Ray (2013) Evaluation of the effect of Cyclic Load on the Microgap at the Implant-Cast Abutment Interface of Screw-Retained Implant Supported Restorations. Masters thesis, Ragas Dental College & Hospital, Chennai.
Soumya Mohan, B (2018) Comparison of shear bond strength of two different ceramic repair systems with two different surface treatments on metal surface: An in-vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Sowmiya Lakshimi, S (2013) Evaluation of Bond Strength of Metal-Resin using Different Modes of Mechanical Retention: An In Vitro study. Masters thesis, Sri Ramakrishna Dental College & Hospital, Coimbatore.
Sree Varun, M (2016) Comparative Evaluation of the Effect of Different Surface Treatments on the Shear Bond Strength between Silicone Soft Liner and Denture Base Resin: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Sree Vidya, Lagisetty (2006) An In Vitro analysis of the dimensional accuracy of dies obtained by using different impression trays. Masters thesis, Ragas Dental College & Hospital, Chennai.
Sridevi, R (2010) Radiographic evaluation of immediately restored single-tooth implant in the anterior maxilla: A six month Follow-up study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Sripriya, S (2010) Evaluation of Thread Design of Conventional Implant and Indigenous Implant in Implant Retained Auricular Prosthesis: In Vitro Study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Srividhya, S (2017) Evaluation of Maximum Bite Force in Patients Rehabilitated with Complete Denture Prosthesis: An In Vivo Study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Sruneerdha, T (2022) An In Vitro Evaluation of the Effect of Saliva and Thermal Aging on Micro Shear Bond Strength of surface treated Zirconia to Resin Cement. Masters thesis, Rajas Dental College and Hospital, Tirunelveli.
Sruthi Priya, M (2018) Comparison of fracture resistance of severely attrited endodontically treated teeth with different core build-up materials: An In Vitro study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Sudarson, K (2011) Comparative Evaluation of the Effect of Location and Number of Implants on the Retention and Stability of Magnetically Retained Implant Supported Mandibular Overdenture: An In Vitro Study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Sudharshan, Ramachandran (2012) Comparative evaluation of the microgap of premachined Titanium and Zirconia abutments at the implant-abutment interface before and after cyclic loading: An In Vitro study. Masters thesis, Ragas Dental College & Hospital, Chennai.
Suganthapriya, S (2018) Evaluation of occlusal and craniofacial planes in temporomandibular disorder patients using broadrick’s occlusal plane analyzer and cephalometric methods. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Surabhi, Halder (2020) Comparative Evaluation of Initial and Reduced Retention Force of Two Different Soft Liners over Ball Abutments for Mandibular Implant Overdentures: An Invitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Syed Ershad Ahmed, (2016) Comparative Evaluation of the Effect of Cyclic Loading on the Abutment Screw Loosening of Premachined and Custom Cast Angled Implant Abutments: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
Tasneem Raji, G (2016) Effects of Different Laser Wavelengths on Surface Roughness of Sandblasted Large Grit and Acid Etched Titanium and Zirconia Implant Substrates: A Comparative In Vitro study. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Thirumurthy, V R (2018) Effect of various splinting materials on the accuracy of open tray implant impressions: An Invitro Comparative study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Uthayana Raaja, S (2017) Evaluation of the micro shearbond strength between a commercially available ceramic repair composite to lithium disilicates using different air abrasive particle sizes: An In Vitro study. Masters thesis, J.K.K. Nataraja Dental College and Hospital, Komarapalayam.
Vaishnavi, V S (2019) Comparative Evaluation of Force Transmission and Wear Resistance between Titanium and Zirconia Abutment at Implant Abutment Interface after Cyclic Loading: An Invitro Study. Masters thesis, CSI College of Dental Sciences and Research, Madurai.
Vee Nithya, P (2020) Correlation between Gonial Angle in Kennedys Class II Partially Edentulous patients with Maximum Occlusal Force using Orthopantomogram. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Vidhiyasagar, P (2012) A Comparative Study to Evaluate the Occlusal Contacts among the Tribal and Urban Population during Lateral Eccentric Mandibular Movements. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Vidhu Antony, (2019) Comparison of Shade Selection by Smartphone Camera and DSLR Camera using Vita 3D Master Shade Guide: An Invitro Study. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Vidhya, J (2011) Comparative Evaluation of the Antimicrobial Efficacy of Three Different Chemical Disinfectants and their Effect on the Dimensional Stability of Polyvinyl Siloxane (PVS) Impressions. Masters thesis, Ragas Dental College & Hospital, Chennai.
Vijay, K (2016) Comparative Evaluation of Fracture Resistance of Pre Fabricated Dental Implant Abutment Connections: An In Vitro Study. Masters thesis, Rajas Dental College & Hospital, Tirunelveli.
Vijay Singh, Chauhan (2020) Clinical Correlation between Maxillary and Mandibular Midline to Facial and Dental Midline in Dentulous Individuals: A Hospital based study. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Vikas, Chahal (2009) A Critical evaluation of different methods of recording centric jaw relation of completely edentulous Individuals: An In Vivo study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Vinamra, Dhariwal (2006) A Comprehensive evaluation of the clinical efficacy of aqua coolant influencing the variation in pulpal temperature during tooth preparation: An In vivo study. Masters thesis, Saveetha Dental College and Hospitals, Chennai.
Vinay, Bharti (2017) Evaluation of Speech and Effect of Customization of Palatal Rugae in Complete Denture Rehabilitation. Masters thesis, Tamil Nadu Government Dental College and Hospital, Chennai.
Vinayakam, S (2009) Evaluation of Arc of Closure using arbitrary ear piece face bow and semi adjustable articulator: An In Vivo study. Masters thesis, Tamilnadu Government Dental College and Hospital, Chennai.
Vinny Mary, Ommen (2011) Efficacy of Newer Disinfectants on Candida Albicans Infected Silicone Based Denture Soft Liner. Masters thesis, Rajas Dental College & Hospital, Tirunelveli.
Vinod, Narayanan (2013) Evaluation of Varied Ferrule Geometry on the Fracture Resistance of Endodontically treated Maxillary Central Incisors: An In Vitro Study. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Vinoth Kumar, S (2018) Assess the effect of low level laser therapy on sensitivity of teeth prepared for fixed partial denture: A Randomized Control Trial. Masters thesis, Adhiparasakthi Dental College and Hospital, Melmaruvathur.
Vishnu, M (2016) In-Vitro Comparison of the Porosity and Permeability of Two Dental Investment Materials Set Under Air Pressure and Its Influence on Surface of the Cast Metal. Masters thesis, Sri Ramakrishna Dental College and Hospital, Coimbatore.
Vivek, B Chandran (2017) Comparative Stress Distribution of Different Implant Designs in Bone: A 3-D Finite Element Analysis. Masters thesis, Sree Mookambika Institute of Dental Sciences, Kulasekharam.
Yasmin Fathima, S (2020) Evaluation of the Effect of Ethylenediamine - Tetraacetic Acid on the Antifungal Property, Flexural Strength and Colour Stability of Poly Methyl Methacrylate Heat Cure Denture Base Resin: An In Vitro study. Masters thesis, Ragas Dental College and Hospital, Chennai.
